Crown CTs 2000

Beschrijving

Features | High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis | Crown Switching Power Supply for lighter weight | Selectable “Constant-Voltage” or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models | 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200 | Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability | 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· “FIT” (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels | Comprehensive array of indicators provide accurate diagnostics | Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules. | Specifications | Channels: 2 | Sensitivity: 1.4 V | Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted): 105dB | THD (full rated power, 20 Hz – 20 kHz) < 0.35% | Damping Factor (10 Hz to 100 Hz) <3000 | Frequency Response (at 1W, 4/8 ohms) +/- 0.25 dB | Crosstalk (below rated power) 20 Hz to 1 kHz > 80 dB | Common Mode Rejection (20 Hz to 1 kHz) > 50 dB | Maximum Input Level before Compression +20dBu | Load Impedance 70V, 100V (2-16 Ohms) | Voltage Gain (at maximum level settings) (8/4 ohm operation) 35:1 (31 dB) | Power Draw at Idle (120VAC mains: standby mode) 35W | Dimensions 3.5″ x 19″ x 14.25″ | Weight 22.8lbs | Shipping Weight 27.7 lbs